logo
απόσπασμα
προϊόντα
προϊόντα
Σπίτι > προϊόντα > Epoxy Powder Coating > Special powder coating for automobile springs
Καταλόγους
Επαφές
Επαφές: Mr. Sindara Steel
Φαξ: 86-731-89695778
Επαφή τώρα
Στείλτε μας.

Special powder coating for automobile springs

Λεπτομέρειες προιόντος

Τόπος καταγωγής: ΚΙΝΑ

Μάρκα: Sindara steel

Πιστοποίηση: ISO 9001, ISO 14001, ISO 45001, CE

Αριθμό μοντέλου: (Τυπικό Q/LYM 08-2015)

Όροι πληρωμής & ναυτιλίας

Ποσότητα παραγγελίας min: 1ο

Τιμή: 100USD-5000USD

Χρόνος παράδοσης: 10-30 ημέρες

Όροι πληρωμής: L/c, t/t

Δυνατότητα προσφοράς: 1000000

Πάρτε την καλύτερη τιμή
Επισημαίνω:

Automobile Springs powder coating

,

Special Powder coating

Special powder coating for automobile springs

Description

 

Special powder coating for automobile springs(Model: EB9031)(Standard Q/LYM 08-2015)

 

"EB9031" is a heavy anti-corrosive modified epoxy powder coating, applied to the

pre-treated steel spring surface, after a certain temperature time of baking, the powder melt and solidified into a uniform, dense film.This coating film has excellent adhesion and can prevent corrosive air, hydrocarbons, acid and alkali salts, microorganisms, waste water and waste gas corrosion. And has excellent toughness and fatigue resistance (more than 2 million compression damping test coating without cracking, peeling, detachment), fatigue test after the salt spray test qualified, excellent impact resistance (-40℃ stone resistance is fully qualified).

 

1. Application scope and characteristics

 
It is suitable for anti-corrosion of automobile springs, stabilizer bars and other types of springs.

The coating wear resistance, flexibility, low temperature impact resistance and other good performance

Compared with other types of coatings, environmental protection, high efficiency, suitable for assembly line operation, excellent anti-corrosion performance
 

2. Method and dosage

 

1 . Coating method: Electrostatic spraying.

2 . Theoretical dosage: 150g/M2/100μm. The coating film thickness is 60~150 μm.

3 . Surface treatment: Acid washing or other treatments that do not affect steel stranded performance.

4 .Curing instructions:In a 170℃ oven for 20 minutes.

 

3.Production Department

 

Special powder coating for automobile springs 0 Special powder coating for automobile springs 1 Special powder coating for automobile springs 2

 

4. Paking

 

Special powder coating for automobile springs 3 Special powder coating for automobile springs 4 Special powder coating for automobile springs 5